Termination Pay: The Calculations That Go Wrong (And How to Get Them Right) 

When an employee leaves a business, calculating their final pay can involve considerably more than paying out their remaining annual leave and outstanding wages. 

Depending on the circumstances, a termination payment may include payment in lieu of notice, redundancy pay, long service leave, unused annual leave, leave loading and other outstanding entitlements. Each component has its own calculation method, eligibility requirements and tax treatment. 

Finalising an employee’s pay involves more than paying out their remaining annual leave. Depending on the circumstances, payroll may also need to account for notice, redundancy, long service leave and different tax treatments. 

Each component has its own rules, and getting the calculations right means knowing what applies to the employee and their specific circumstances. 

Let’s look at the key areas payroll teams should review when processing termination pay. 

1. Calculating unused annual leave at the wrong rate 

One of the most common mistakes in termination processing is calculating unused annual leave using an employee’s base hourly rate without checking whether additional payments should be included. 

Under the National Employment Standards (NES), employees must be paid for any accrued annual leave they haven’t taken when their employment ends. 

However, the payout must be equivalent to what the employee would have received if they had taken the leave during employment. This can include annual leave loading and other applicable payments under their award, enterprise agreement or employment arrangements. 

For example, an employee may be entitled to annual leave loading of 17.5%. If this loading would have applied when they took annual leave, it must also be included in their termination payout. 

Worked example 

An employee finishes employment with 76 hours of unused annual leave and an ordinary hourly rate of $35. 

Calculation Amount 
76 hours × $35 $2,660.00 
17.5% annual leave loading $465.50 
Total annual leave payout $3,125.50 

In this example, paying only the $2,660 base amount would leave the employee $465.50 short. 

The important point is that employers need to check the applicable award or agreement rather than assume every employee receives the same annual leave loading. 

The Fair Work Ombudsman explains annual leave payments on termination, including how leave loading should be calculated. 

For more detail, see Alltech’s existing guide on Rates of Pay on Termination: What Can Be Included in Lump Sum D. 

2. Getting payment in lieu of notice wrong 

When an employer terminates an employee’s employment without requiring them to work through their notice period, they may need to provide payment in lieu of notice. 

The calculation isn’t always as straightforward as multiplying an employee’s base hourly rate by the number of hours in the notice period. 

Under the NES, the minimum notice period depends on the employee’s continuous service: 

Continuous service Minimum notice 
1 year or less 1 week 
More than 1 year, up to 3 years 2 weeks 
More than 3 years, up to 5 years 3 weeks 
More than 5 years 4 weeks 

Employees who are at least 45 years old and have completed at least two years of continuous service with their employer are entitled to an additional week of notice. 

When notice is paid out, the employee must receive the full amount they would have earned had they worked through the notice period. This can include incentive-based payments, bonuses, loadings, monetary allowances, overtime, penalty rates and other separately identifiable amounts. 

Where calculations go wrong: 

  • Using the employee’s base rate without checking other applicable payments. 
  • Overlooking the additional week for eligible employees aged 45 and over. 
  • Using the wrong length of service when determining the notice period. 
  • Confusing payment in lieu of notice with redundancy pay. 

Notice and redundancy are separate entitlements. An eligible employee may be entitled to both. 

There’s also an important distinction between paying an employee through their notice period and paying out the notice period. If the employee works through notice, their employment continues and they continue accruing applicable entitlements. If notice is paid out and employment ends immediately, further leave doesn’t accrue over the paid-out period. 

For more information, see Alltech’s article on Pay in Lieu of Notice vs Gardening Leave. 

3. Miscalculating redundancy pay 

Redundancy calculations can become complicated, particularly when an employee has several years of service or the business is restructuring its workforce. 

Under the NES, eligible employees may be entitled to redundancy pay when their position is made redundant. 

The amount is generally determined by the employee’s continuous service with the employer and their base rate of pay for ordinary hours of work. 

The NES redundancy scale is: 

Continuous service Redundancy pay 
At least 1 year but less than 2 years 4 weeks 
At least 2 years but less than 3 years 6 weeks 
At least 3 years but less than 4 years 7 weeks 
At least 4 years but less than 5 years 8 weeks 
At least 5 years but less than 6 years 10 weeks 
At least 6 years but less than 7 years 11 weeks 
At least 7 years but less than 8 years 13 weeks 
At least 8 years but less than 9 years 14 weeks 
At least 9 years but less than 10 years 16 weeks 
At least 10 years 12 weeks 

Notice the reduction after 10 years of service. This is an important detail that can be missed when calculating redundancy manually. 

Who is eligible? 

Not every employee is entitled to redundancy pay under the NES. 

Exceptions include: 

  • Employees with less than 12 months of continuous service. 
  • Most casual employees. 
  • Employees employed for a specified period or season. 
  • Employees of most small businesses with fewer than 15 employees. 
  • Apprentices and certain trainees. 
  • Employees dismissed for serious misconduct. 

Different provisions may apply under an award or enterprise agreement. 

Employers should also check whether the employee has been offered suitable redeployment, whether any service exclusions apply and whether the redundancy is genuine. 

The Fair Work Ombudsman provides a redundancy pay calculator and further guidance. 

4. Getting long service leave calculations wrong 

Long service leave (LSL) is another area where termination calculations can become complicated. 

Unlike annual leave, long service leave is primarily governed by state and territory legislation. This means the eligibility requirements, payment calculations and treatment of pro-rata entitlements can differ depending on where the employee works. 

For example, in NSW, employees generally become entitled to 8.67 weeks of long service leave after 10 years of continuous service. 

If employment ends after five years, an employee may also qualify for a pro-rata payment in certain circumstances, including resignation due to illness, incapacity or domestic or other pressing necessity, or termination by the employer for reasons other than serious and wilful misconduct. 

The calculation can also become more involved for employees with irregular hours or changing pay rates. 

In NSW, for example, employees with irregular hours may have their ordinary weekly rate calculated using the average over the last 12 months or the last five years, whichever is greater. 

What should employers check? 

  • The employee’s state or territory of employment. 
  • Their continuous service date. 
  • Whether any periods of unpaid leave affect their service calculation. 
  • Whether they meet the eligibility requirements for a full or pro-rata payment. 
  • The correct ordinary rate of pay under the applicable legislation. 
  • Whether the employee has any previously taken or paid-out long service leave. 

Using a generic long service leave calculation across every state is a common way to get the final payment wrong. 

For further information, see Xero’s guide to Long Service Leave in Australia and the relevant state or territory legislation. 

5. Applying the wrong tax treatment to termination payments 

Calculating the gross termination payment correctly is only part of the process. Employers also need to make sure each component is classified and taxed correctly. 

Not every termination payment is treated as an employment termination payment (ETP). 

For payroll purposes, it’s important to distinguish between: 

Unused annual leave and long service leave 

Payments for unused annual leave, leave loading and long service leave have specific PAYG withholding requirements. They are not classified as ETPs. 

Employment termination payments (ETPs) 

Certain payments made as a result of employment ending are classified as ETPs. These can include: 

  • Payment in lieu of notice. 
  • Certain gratuities or golden handshake payments. 
  • Unused rostered days off in certain circumstances. 
  • Other eligible payments made in consequence of termination. 

ETPs have their own tax treatment, including applicable caps and concessional withholding rates. 

Genuine redundancy payments 

A genuine redundancy payment may contain a tax-free component up to the applicable ATO threshold, with any remaining taxable component treated according to the relevant rules. 

However, not every payment made when an employee is made redundant automatically qualifies for the genuine redundancy tax concession. 

Employers need to identify the reason for termination and correctly separate the different payment components. 

What tax tables should payroll use? 

From 1 July 2026, employers must use the ATO’s updated Schedule 7 when calculating PAYG withholding on unused leave payments made on termination. 

Schedule 7 covers unused annual leave, leave loading, leave bonuses and long service leave. 

ETPs are dealt with separately under the applicable ETP withholding schedule. 

Using the standard PAYG tax table for an ordinary pay run instead of the appropriate termination payment schedule can result in incorrect withholding. 

The ATO’s Schedule 7 tax table provides the current calculation requirements for unused leave payments. 

For more information, see Alltech’s article on Termination and Age: What Payroll Needs to Check, which explains how an employee’s age can affect notice entitlements and the tax treatment of termination payments. 

6. Forgetting to check superannuation 

Superannuation is another consideration when processing final pay, and different termination payment components can have different superannuation treatments. 

For example: 

Payment type Super guarantee treatment 
Unused annual leave paid on termination Generally not payable 
Unused long service leave paid on termination Generally not payable 
Employment termination payments Not payable 
Payment in lieu of notice Generally treated as ordinary time earnings 

Payment in lieu of notice is an important one to check. While it is an employment termination payment for tax purposes, the ATO identifies it as ordinary time earnings for superannuation purposes. 

This is a good example of why payroll teams need to assess each payment component separately rather than applying one rule to the entire termination amount. 

The ATO’s guide to payments that are ordinary time earnings provides further information. 

7. Processing final pay too late 

Even when every calculation is correct, the timing of the final payment matters. 

Employers need to check the applicable award, enterprise agreement and NES requirements to determine when each component must be paid. 

Most modern awards require final pay to be processed within seven days of the employee’s last day. However, some NES entitlements have different payment timing requirements. 

A 2025 Federal Court decision in Jewell v Magnium Australia Pty Ltd (No 2) reinforced the importance of paying NES termination entitlements on time. Employers should not assume they can simply include every termination payment in their next ordinary payroll run. 

This is particularly important for: 

  • Payment in lieu of notice. 
  • Accrued annual leave. 
  • Redundancy pay. 

Long service leave payment timing should also be checked against the applicable state or territory legislation. 

Alltech has covered this in more detail in Termination of Employment: When Does Final Pay Need to Be Paid?

The practical takeaway is simple: notify payroll as early as possible when an employee is leaving. Waiting until the employee’s final day to start calculating their entitlements can create unnecessary pressure and increase the risk of mistakes. 

A final pay checklist for employers 

Before processing a termination, payroll teams should work through the following checks: 

  • Confirm the termination details: Check the employee’s final day, reason for termination and length of continuous service. 
  • Check the applicable award or agreement: Review any additional entitlements or specific calculation requirements. 
  • Reconcile outstanding wages: Include all hours worked, overtime, allowances, commissions and other outstanding payments. 
  • Verify annual leave: Check the balance, applicable rate of pay and any annual leave loading. 
  • Calculate notice correctly: Confirm the notice period, employee age and any additional week of notice. 
  • Review redundancy eligibility: Check the employee’s service, employer size and applicable redundancy provisions. 
  • Calculate long service leave: Apply the correct state or territory legislation. 
  • Check tax classifications: Separate unused leave, ETPs and genuine redundancy components. 
  • Review superannuation: Confirm which payment components are subject to super guarantee. 
  • Check final pay timing: Make sure each entitlement is paid within the required timeframe. 
  • Finalise STP reporting: Ensure the termination date, reason and payment components are reported correctly to the ATO. 

Getting termination pay right 

Termination pay is one of the more complex areas of payroll because it brings together several different employment entitlements, calculation methods and tax requirements. 

A seemingly small oversight, such as missing annual leave loading, using the wrong notice period or applying an incorrect tax table, can affect the employee’s final payment and create compliance issues for the employer. 

The key is to look at each component separately, check the relevant legislation and award provisions, and make sure the calculations are reviewed before the final pay is processed. 

At Alltech Payroll, we understand that termination processing requires more than simply running a final payslip. Our team helps businesses manage payroll calculations, employee entitlements and compliance requirements, so every part of the process is handled correctly. 

If your business needs support with complex payroll requirements or end-to-end payroll processing, get in touch with the Alltech team. 

Share this post

Send an Enquiry